Liber Pigmenta Liber Pigmenta

Poradniki malowania / Warhammer 40,000 / Death Guard / Blightlord Terminators

Jak malować Blightlord Terminators

Zdjęcia referencyjne, schematy kolorystyczne z dokładnymi farbami do każdego obszaru i gotowe modele innych malarzy — wszystko, czego potrzebujesz, żeby zacząć Blightlord Terminators dla swojej armii Death Guard.

Rola InfantryPunkty 115Frakcja Death GuardSystem Warhammer 40,000

ChaosNurgleBlightlord TerminatorsTerminator

Znajdź farbę

Każda farba poniżej prowadzi do jej odpowiedników w innych markach.

Jak wygląda Blightlord Terminators

Schematy kolorystyczne

Death Guard — Blightlord Terminators

Średni · 5 obszarów

Plague Marine colours on far bigger plates, so the rust needs planning rather than scattering — decide where water would run before you stipple.

Plague armour

  1. Basecoat the armour Basecoat — Death Guard Green over black. Uneven coverage is a feature here — it reads as grime.
  2. Shade the whole plate All-over shade — Athonian Camoshade across everything. Unlike a clean marine, Death Guard wants the wash on the flats too.
  3. Edge highlight sparingly Edge highlight — Nurgling Green on the plate edges, broken and interrupted rather than a continuous line.

Rusted metal

  1. Basecoat the metal Basecoat
  2. Corrode it Stipple — Typhus Corrosion stippled on unevenly — this is the single step that makes the army look like Death Guard.
  3. Rust bloom Drybrush — Ryza Rust over the wet-looking Typhus Corrosion, concentrated at bolts and joins.

Tarnished bronze

  1. Basecoat the bronze trim Basecoat
  2. Verdigris the recesses Recess shade — Agrax Earthshade first, then Nihilakh Oxide dabbed only where water would sit.
  3. Highlight the bronze Edge highlight

Rotted flesh

  1. Basecoat the flesh Basecoat — Rakarth Flesh over the whole exposed area — pallid, not pink.
  2. Shade and bruise All-over shade — Reikland Fleshshade overall, then Druchii Violet only where the flesh is distended.
  3. Highlight and open the wounds Layer — Pallid Wych Flesh on the raised skin, Bugman’s Glow inside the splits.

Blighted base

  1. Mud the base Texture — Stirland Mud thickly around the feet, thinner at the rim.
  2. Pool the slime Detail — Nurgle's Rot in the low spots only — it is a gloss, so a little reads as standing filth and a lot reads as varnish.
  3. Rim the base Detail

Wszystkie farby na tej stronie

18 farb we wszystkich schematach i poradnikach powyżej. Odhacz to, czego potrzebujesz, żeby zbudować listę, albo przejdź do farby, żeby znaleźć ją w innej marce.

Więcej poradników malowania Death Guard →

Prowadź ten projekt od ramki do gotowego modelu

Dodaj Blightlord Terminators do stosu, odhacz farby, które już masz, i sprawdź, czego jeszcze brakuje, zanim otworzysz pudełko.

Dodaj do stosu — bez konta

Wygeneruj schemat kolorów — bez konta

Farby na Twojej liście: 0 Zapisz tę listę