Liber Pigmenta Liber Pigmenta

Painting guides / Warhammer 40,000 / Death Guard / Blightlord Terminators

How to paint Blightlord Terminators

Reference photos, colour schemes with the exact paints for every area, and finished models from other painters — everything you need to start Blightlord Terminators for your Death Guard force.

Role InfantryPoints 115Faction Death GuardSystem Warhammer 40,000

ChaosNurgleBlightlord TerminatorsTerminator

Find a paint

Every paint below links to its equivalents in other brands.

What Blightlord Terminators looks like

Colour schemes

Death Guard — Blightlord Terminators

Intermediate · 5 areas

Plague Marine colours on far bigger plates, so the rust needs planning rather than scattering — decide where water would run before you stipple.

Plague armour

  1. Basecoat the armour Basecoat — Death Guard Green over black. Uneven coverage is a feature here — it reads as grime.
  2. Shade the whole plate All-over shade — Athonian Camoshade across everything. Unlike a clean marine, Death Guard wants the wash on the flats too.
  3. Edge highlight sparingly Edge highlight — Nurgling Green on the plate edges, broken and interrupted rather than a continuous line.

Rusted metal

  1. Basecoat the metal Basecoat
  2. Corrode it Stipple — Typhus Corrosion stippled on unevenly — this is the single step that makes the army look like Death Guard.
  3. Rust bloom Drybrush — Ryza Rust over the wet-looking Typhus Corrosion, concentrated at bolts and joins.

Tarnished bronze

  1. Basecoat the bronze trim Basecoat
  2. Verdigris the recesses Recess shade — Agrax Earthshade first, then Nihilakh Oxide dabbed only where water would sit.
  3. Highlight the bronze Edge highlight

Rotted flesh

  1. Basecoat the flesh Basecoat — Rakarth Flesh over the whole exposed area — pallid, not pink.
  2. Shade and bruise All-over shade — Reikland Fleshshade overall, then Druchii Violet only where the flesh is distended.
  3. Highlight and open the wounds Layer — Pallid Wych Flesh on the raised skin, Bugman’s Glow inside the splits.

Blighted base

  1. Mud the base Texture — Stirland Mud thickly around the feet, thinner at the rim.
  2. Pool the slime Detail — Nurgle's Rot in the low spots only — it is a gloss, so a little reads as standing filth and a lot reads as varnish.
  3. Rim the base Detail

Every paint on this page

18 paints across every scheme and tutorial above. Tick what you need to build a list, or follow a paint through to find it in another brand.

More Death Guard painting guides →

Track this project from sprue to finished

Add Blightlord Terminators to your pile, tick off the paints you already own, and see what is still missing before you open the box.

Add it to your pile — no account needed

0 paints on your list Save this list